National Liner makes every attempt to ensure that it is providing the best quality of lining material available for the end system.
RESIN: PRODUCT INFORMATION
| Isophthalic-Based Resin for Underground Sewer Pipe Liners |
| Typical Liquid Resin Properties* |
|
Nominal |
|
Test Method |
| Viscosity @ 77°F/25°C, RVF Brookfield |
|
|
|
|
| Spindle #4 @ 20 RPM, cps. |
|
3000 |
|
QI-003 |
|
| Thix Index 2/20 |
|
4 |
|
QI-003 |
|
| Color |
|
Opaque |
|
|
|
| Specific Gravity @ 77°F/25°C |
|
1.11 |
|
QI-004 |
|
| Non-volatiles, % |
|
62 |
|
QI-1005 |
|
| Gel Time @ 140°F with |
|
|
|
|
| (1.0% Di-(4-tert-butyl-cyclohexl) |
|
|
|
|
| peroxydicarbonate and 0.5% |
|
|
|
|
| Trigonox® KSM) minutes |
|
12 |
|
Q-068 |
|
| Pot Life @ 77°F/25°C |
|
|
|
|
| (1.0% Di-(4-tert-butyl-cyclohexl) |
|
|
|
|
| peroxydicarbonate and + 0.5% |
|
|
|
|
| Trigonox® KSM) hours |
|
48 |
|
Q-026 |
|
| Typical Cast Mechanical Properties* |
|
Nominal |
|
Test Method |
|
| Tensile Strength, PSI/MPa |
|
13,500/93.1 |
|
ASTM D-638 |
|
| Tensile Modulus, PSI/GPa |
|
600,000/4.1 |
|
ASTM D-638 |
|
| Tensile Elongation, % |
|
3.0 |
|
ASTM D-638 |
|
| Flexural Strength, PSI/MPa |
|
23,300/161 |
|
ASTM D-790 |
|
| Flexural Modulus, PSI/GPa |
|
630,000/4.3 |
|
ASTM D-790 |
|
| Heat Distortion Temp., °F/°C 264 psi |
|
212/100 |
|
AASTM D-648 |
|
| Barcol Hardness |
|
40 |
|
ASTM D-2583 |
|
Trigonox is a trademark of Akzo Nobel Chemicals
Typical properties are not to be construed as specifications |
During the hot summer months, no more than two months stability at 86°F/30°C should be anticipated.
ISO 9002 Certified
The quality management systems at every AOC manufacturing facility have been certified as meeting ISO 9002 standards.
This certification recognizes that each AOC facility has an internationally accepted model in place for managing and
assuring quality. We allow the practices set forth in this model to add value to the resins we make for our customers.
AOC Resin Information
|
